KISS is as easy to fabricate as it is to don. It suspends both distally and proximally through a pulley-action system that offers infinite adjustability without the use of a ratchet. KISS componentry is available in kit form and individually. A KISS-Kit includes everything needed to install the KISS system on a single socket. Click the image to the left to learn the advantages KISS has over other systems.
KISS-Kits available: Adult and Pediatric Delrin KISS-Kit, and Adult and Pediatric 4-Hole Endoskeletal KISS-KitA common set of supporting components is used in all three kits. The differentiating component in each kit is the Distal Base.    
   
   
The distal Base fits in the bottom of the socket and is used to secure the liner to the socket through a pulley-action system. A key component required to secure KISS to the liner is KISS Glue, which is sold separately in a fabrication kit. The Fabrication-Kit is required for the proper fabrication of KISS™. It includes KISS™ Adhesive and KISS™ Press Plates. Please note the Bocklite insert visibie in the pictures on this website is used here only to simulate a limb for demonstrational purposes.
 

Introducing the KISS Low Profile Valve
 

Flexible Inner Socket KISS™-Kit (KS1/A)

Click For A Video Explanation of the Flexible Inner Socket Kit

This KISS™-Kit features a Delrin Docking Base which can be vacuum formed in a flexible inner socket, and can be used with any covered roll-on locking liner. Includes an aluminum tab to assist in fabrication.

Includes the following components:
  • (1) CMP1/A - Delrin Docking Base
  • (1) CMP5/A - KISS™ Placard Set
  • (1) CMP6/A - Inferior Attachment Strap Set
  • (1) CMP4/A - Superior Nut & Screw Set
  • (1) CMP7/A - Superior Attachment Strap Set
  • (1) CMP8/A - Distal Screw Set
  • (1) CMP9/A - KISS™ Muffler Set
  • KISS Glue is required and is sold separately. 1 Bottle of KISS Glue = 20Applications.

Aluminum 4-Hole European KISS™-Kit (KS2/A)

ClickFor A Video Explanation of the 4-Hole European Kit

This KISS™-Kit features an Aluminum 4-Hole European Docking Base which also serves as an attachment base for endoskeletal componentry, and which can also retro fit with PDI™ and Bulldog™ shuttle locks. This will allow the amputee to achieve an unparalleled degree of comfort and control in his/her current socket. Includes an aluminum tab to assist in fabrication. Lamination adaptor and spacer screws sold separately.

Includes the following components:
  • (1) CMP2/A - Aluminum 4-Hole Euro Docking Base
  • (1) CMP5/A - KISS™ Placard Set
  • (1) CMP6/A - Inferior Attachment Strap Set
  • (1) CMP4/A - Superior Nut & Screw Se
  • (1) CMP7/A - Superior Attachment Strap Set
  • (1) CMP8/A - Distal Screw Set
  • (1) CMP9/A - KISS™ Muffler Set
  • KISS Glue is required and is sold separately. 1 Bottle of KISS Glue = 20Applications.
  • Lamination spacer and screws sold separately as part CMP14/A

 

    
 
       
Delrin Distal Base (CMP1/A)
 
4-Hole Endoskeletal Distal Base (CMP2/A)
       
 
This page is copyright 2005 by KISS Technologies LLC. KISS is a registered trademark of KISS Technologies LLC and the Keep It Simple Suspension System is protected by US and International Patents.